$ 87.00
SKU:
FPTX64809803
Category:
Eternabond Double Sided Tape 1″ x 15.2m – It is ideal for repairing flashings, gutter, skylights, copings, ductwork, and more.
EternaBond’s new pressure-activated MicroSealant Technology is a sealant so advanced it permanently bonds to virtually any roof type. It is ideal for repairing flashings, gutter, skylights, copings, and ductwork.
DoubleStick is pure EternaBond advanced MicroSealant with a removable siliconized release liner on each side. Designed to bond two surfaces, even two characters made of two or more dissimilar materials. Double- Stick creates a tight, permanent, waterproof seal. DoubleStick remains flexible to temperatures as low as -57C, making it virtually impossible to shock the seal, causing a leak thermally.
DoubleStick Bonds to a wide range of surfaces, including EPDM, TPO, most PVC, CSPE/ Hypalon, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, tiles, shingle, coated and non-coated aluminum and metal roofs, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB board, shielding membranes, etc.
Basic Use:
DoubleStick tape is a self-sealing adhesive creating a water-tight, conformable seal between two or more irregular surfaces and/or creates a weatherproof, permanent bond between similar or dissimilar characters. Use as a lap seal, under the foot of an equipment curb or skylight, or roll it into a bead or ball of MicroSealant to form a gasket, seal a hole or gap as needed.Surface Preparation:The surface must be clean and dry. Moisture, dust, dirt, or other foreign matter should be removed. Remove oil, grease, etc., with Eternaprime (RVO699) or a non-residue cleaner such as acetone or lacquer thinner. Remove salt and other contaminants.